An iPad screen protector can keep the screen from getting dirty and scratched. The screen is permanently damaged once it is scratched but once a user is aware how to install an iPad screen protector, the screen and iPad stands a much better chance of survival. An iPad screen protector is a clear sticker to go over the screen and can be easily replaced once scratched and dirty.


Instructions
  1. Turn of the iPad. To apply an iPad screen protector without harming the computer or hitting the wrong keys, completely shut it down until the iPad screen protector is securely in place.
  2. Take a lens or microfiber cloth and get it only wet enough to wipe off the screen. The iPad screen protector adheres best to a clean surface but can also trap dust inside and it could cause scratches overtime if not properly wiped down.
  3. Once the screen is clean, line up the iPad screen protector to the edges of the iPad perfectly. Everything must line up before going any further so align all edges and buttonhole evenly.
  4. Start from one end of the iPad and slowly work up. Take a finger and press firmly down as the protector is applied. Smooth out to the sides to let air escape to avoid any bubbling in the protector.
  5. Do the same for the whole iPad.  Keep the edges aligned, move slowly to keep air out.  It is hard to remove an iPad screen protector and start all over again with the same one so have patience.  The couple minutes it takes is worth protecting the iPad.


Related Post :

Comments

1 Response to “How To Install iPad Screen Protectors”

  1. kunjungi info bisnisku on 13 Agustus 2013 pukul 05.10

    nice info about how to install ipad protector

Leave a Reply